The Icarus Art May 2010 Newsletter was just sent out. If you'd like to register for the newsletter, you can go to the homepage of Icarus Art and click the sign-up button on the top right corner.
Subscribe to my newsletter to receive 4 to 5 emails per year where I highlight important news, available originals, and seasonal specials.
The Icarus Art May 2010 Newsletter was just sent out. If you'd like to register for the newsletter, you can go to the homepage of Icarus Art and click the sign-up button on the top right corner.
My artwork "The Lightness of Being" has been accepted into the 18th Annual CPSA International Exhibition! I am ecstatic about this acceptance because it's my third one and therefore I will be getting my CPSA signature. Not to mention that this is the year I will be teaching my workshop "Wax and Heat, A Match Made in Heaven". Congratulations to all the artists invited into the show.
I have just finished making two ATC cards for a group project with the San Diego District Chapter of the Colored Pencil Society. It's the first time I have attempted to do such miniature artworks (2.5" x 3.5") and I have to say... it's been a challenge. I like to work big so that the finest line in the painting is at least twice the size of the pencil point. In these two examples the point of the pencil felt too thick for the size of the projects.
2.5" x 3.5" - Wax-based Media (Colored Pencil)
Created with the Icarus Drawing Board
Many artists have asked me how I frame my artwork on paper without glass so I decided to write a post about the process I follow.
1. FIXATIVE
I gently remove any wax bloom with a soft cloth. Edit (3/31/11): if I'm dealing with a lot of wax bloom, I blow some warm air over the affected area with a hair dryer or heat gun. The wax bloom disappears right before my eyes.
Then I take my piece outside and spray it with 5 coats of Prismacolor Final Fixative - Gloss, waiting 15 minutes between coats. Edit (11/29/12): In place of fixative I now use Golden Archival MSA Spray Varnish - Gloss. After it's dry I run a white cotton handkerchief over its surface. If there is no color residue left on the handkerchief my artwork is ready for varnish, otherwise I spray more fixative. It's important to create a solid barrier between the pigments and the varnish. I let the fixative dry overnight.
2. MOUNTING
I mount my large pieces on Ampersand Claybord with 3/4" cradle, the smaller ones on Claybord with 2" cradle. There are also 1/8" flat panels available. I like the Claybord panels because their surface is completely archival, lightfast and acid free. After dislodging any debris from the back of my artwork, I trim the extra white paper around it.
My artwork at this point should be a bit larger than the panel - to account for possible misalignment during mounting. I carefully mount it on a sheet of Grafix Double Tack Mounting Film which I then mount on the panel. After turning the panel upside down, I trim the edges and put it under heavy books overnight. Please practice mounting before you do it with a valuable piece of art.
More on this on the following post: How to Mount Paper on Board. Update (2/26/2013)
3. VARNISHING
I usually paint the edges of the cradled panel in acrylic and then begin varnishing with Golden Polymer Varnish with UVLS (Ultra Violet Light Stabilizers) - Gloss. This is a waterborne acrylic polymer varnish that dries to a protective, flexible, dust-resistant surface. It needs to be thinned with water, 2-3 part varnish to 1 part water. I apply at least 3 coats with a soft, wide brush and wait 3 hours between coats. The varnish cures completely in one week. You can then frame your panel or hang it without a frame.
This process, especially at the beginning, is a little time consuming but certainly worth the effort. I just love that my art can be exhibited along with the best oil and acrylic paintings and still generates the most curiosity. "I can't believe it's colored pencil" has become the standard reaction followed by numerous questions on my technique and presentation.
If you you are interested in how I mount and frame my artwork on canvas without glass, please visit the following posts:
Canvas and the Icarus Board
Canvas and the Icarus Board: Part 2
Canvas and the Icarus Board: Final Post
"Above and Below" took another First Place at the 2010 Pencil Painting Exhibition presented by the Los Angeles District Chapter of the Colored Pencil Society of America. The Cypress Community Gallery, located at 5700 Orange Avenue in Cypress, is hosting the show until April 16 (Mon-Fri, 9-5). I was told the as soon as the judge, Michael Daniel, entered the gallery, he immediately asked to be reassured that my artwork was indeed made with colored pencil.
Below are the pictures of my winning artwork and of the award recipients. From left: Ester Roi (1st Place), Barbara Roger (Honorable Mention), Ruth Anisman (2nd Place) and Ruth Arthur (3rd Place). Other Honorable Mentions were awarded to: Jeff George and Margaret Lindsey. Congratulations to all!
As an artist I'm always searching for different ways to look at the world around me. In my latest piece, "The Lightness of Being", you can see how simple poppies transform into ethereal creatures when turned upside down. What do you do to get a whole new point of view?
The Icarus Art March 2010 Newsletter was just sent out. If you'd like to register for the newsletter, you can go to the homepage of Icarus Art and click the sign-up button on the top right corner.
I'm happy to announce that "The Butterfly Effect" received First Place in the San Clemente Art Gallery Spring Judged Show, Other Media Category (Colored Pencil on the Icarus Drawing Board). If you'd like to find out how I did the background, you can click on this blog link.
When using oil-based colored pencils with the Icarus Drawing Board, make sure to combine them with a wax-based medium. As you can see below, a thick layer of wax-based colored pencil is necessary to make the oil-based one as blendable as its wax counterpart.